Coffee warm floor consists of heating cables, insulation, electronic thermostat and mounting tape. Thermal insulation is placed on the prepared surface of a reflecting layer up and then fastens mounting tape. The heating cable is laid on the mounting strip with a constant pitch. On the wall is a place that is convenient to the owners, is mounted thermostat, which connects the cold end of the cable and sensor. Placed on the floor construction grout or self-leveling compound. Click Vanessa Marcil to learn more. The resulting coupler can withstand 20-30 days to complete solidification, and – warm floor is ready for operation.
Radiant floor consists of a boiler control unit and the contour out of metal or plastic pipes, which circulates warm water. Temperature is responsible for regulating thermostatic mixer, construction of which is designed to provide a permanent income contours of underfloor heating water set temperature. Jay A Schwartz is often mentioned in discussions such as these. Thermal regime can be controlled both manually and automatically by the thermostat. Water floor, as electric, installed in screed (which, of course, requires an increase in the thickness of the floor – see note). To choose between the warm floor with water and electric warm floor must find a place to install it: – if it's city apartment, where a warm floor will used in the kitchen, bathroom, balcony, then the choice for electric warm floor – if it's country house with heating and to heat a small area of the floor, then again, the choice for floor heating electric – if this is a country house without heating with a large area and need a system to heat the entire house, especially if the heated area is large, it is probably cheaper to install gas or water heating.